|
G-Kites Banner Poles |
|
Gomberg Kites offers the complete line of banner and windsock display systems. These are not fishing poles with a "sensitive" (ie. flimsy) tip that will break off in the wind or puncture your banner. Our award winning poles were specifically designed for display and banner applications. Modular Poles: WindStinger 16.5 | WindRuler 16.5 Tellescopic Poles: Heavy Duty Tellescopic | Compact TourMaster Accessories: Fiberglass Anchor Stake Place an Order When selecting a display system, you should first consider what you want to do with it. Some poles are designed for convenience and portability. Some are designed for durable long-term commercial displays. Stronger poles are heavier and more expensive than lighter ones. And of course, we have a selection to meet any of these conditions and applications.
|
|
GKPI is the exclusive distributor of Windfeather™ poles to the kite community.
|
|
The 16.5 foot tall WindStinger™ modular fiberglass pole is designed for long-term display and commercial applications. It was named the best new product of 2007 by the Kite Trade Association International. The "Stinger" is a heavy-duty commercial banner pole featuring our exclusive modular stacking assembly. This pole cannot collapse even during extended use and there are no pesky caps and plugs to keep track of! Each section is numbered for fool proof assembly. WindStingers are more rigid and better suited to permanent banner or windsock display. It is specifically sized to hold a Windfeather Banners Add an optional extension section to stretch the WindStinger to 20 feet! Stinger Exrtenstions are $15.
|
|
The 16.5 foot tall WindRulerr™ modular fiberglass pole is identical to the WindStinger™ except that it it is designed to be slighly more flexible. This makes the WindRuler™ better suited for short-term banner shows.
|
|
GKPI Poles and Accessories
|
|
28 Foot Heavy Duty Telescopic Pole GKPI Also stocks a thick-walled, 28 foot telescopic pole. If you need to display windsocks, or put a smaller kite on static display, this is the tool to use. And it still collapses to 42 inches. The heavy duty pole has a wider, 2 inch base, nine extending sections, and a flat black matte finish. To extend the pole, simply remove the end cap and tilt the pole down so all the sections slide out. Kite line can easily be stored on the pole when wound around the two firmly attached brass clips.
|
|
Banner Stakes: Many people use rebar to anchor their banners. And that's why their poles break. The metal edges rub the inside of the pole and weakens it. And the metal doesn't flex in the wind. The preferred way to anchor your poles is with lighter weight, flexible and clean fiberglass stakes. The Get In the Wind stake is a 42 inch solid 1/2 inch diameter fiberglass pole. Buy them in a set with your poles or buy them separately for $9 each. |
|
Back To Our Main Pages
|
|