Banner Poles and Accessories: Telescopic poles are great for banners and displaying line laundry. I guess you could also use them for fishing, but that's boring... The 16.5 foot tall Ringmaster� telescopic fiberglass pole is ideal for displaying everything from Windfeather Banners to windsocks and streamers. Specifically designed for banner and display applications, the Ringmaster� features tellescopic sections, a metal base cap, solid fiberglass top section, and a custom designed metal tip ideal for all kinds of uses. This is absolutely the best banner pole on the market.

Check out these special features: 16.5 foot overall length in convenient 42 inch telescopic sections Micro-thread transitions to lock sections in place Tough metal base cap that won't crack or break New metal tip that won't poke through your banner Convenient metal loop for attaching streamers or windsocks Solid fiberglass top section to eliminate breakage. Metal reinforcement rings at each segment to prevent splitting and swelling. Swelling is the main cause of pole collapse. Brass anchor clip set closer to the base so banners display on entire pole and closer to the ground. Solid fiberglass groundstake that is lighter in weight but won't damage the pole like metal or rebar stakes Galvanized ground base to allow the pole to rotate in the wind and minimize "pole wrap".

The 16.5 foot Traveler� is designed for people who can't carry a longer 42 inch pole. It has all the great benefits of our Ringmaster�, but with 11 telescopic sections, it breaks down to just 24 inches. The Traveler� is perfect for a suitcase, duffel bag, or crowded car trunk. Unbreakable Metal Base Cap Collapses to Just 24 Inches Improved Metal Connector Tip The Traveler� is an exclusive Gomberg design. It includes a metal screw-on base cap that won't crack or break, 11 telescopic sections, a solid fiberglass end section for more strength, and an improved metal tip that won't puncture banners and is easy to connect windsocks to. And it costs the same as the standard RingMaster� Pole.

28 Foot Heavy Duty Poles: GKPI Also stocks a thick-walled, 28 foot telescopic pole. If you need to display windsocks, or put a smaller kite on static display, this is the tool to use. And it still collapses to 42 inches.

GKPI is the exclusive distributor of Ringmaster� and Traveler� poles to the kite community. 16.5 ft Ringmaster� Telescopic Pole and anchor stake -- $39.00 16.5 ft Ringmaster� Telescopic Pole only (no stake) -- $32.00 16.5 ft Traveler� Telescopic only (no stake) -- $29.99 28 ft Heavy Duty Telescopic Pole -- $50.00 Solid fiberglass stake -- $9.00 10% discount or orders of 6 units.

Banner Stakes: Many people use rebar to anchor their banners. And that's why their poles break. The metal edges rubs the inside of the pole and weakens it. And the metal doesn't flex in the wind. The preferred way to anchor your poles is with lighter weight, flexible and clean fiberglass stakes. The Get In the Wind stake is a 42 inch solid 1/2 inch diameter fiberglass pole. Buy them in a set with your Ringmaster� or buy them separately.

Pole Sleeves: Want to display more than one windsock on your pole? We've got just the thing! The exclusive GKPI Pole Sleeve is designed to fit over the 16.5 foot Ringmaster�. It connects to the banner hook at the base of the pole, and contains four plastic snap-hooks spread at three foot intervals from the top.

Pole-Sleeves are $12 each or three for $30 and are designed for small and moderate sized "pole laundry" such as Spikey Balls or Star Pillows.

Place an Order

Back to Windfeather Banners

Back to Gomberg Kite Productions International

Email: [email protected]

Phone: 541-996-3083 (Pacific)